Ports and protocols to open for Ooma Office

Ooma Office requires certain ports and protocols to be open to ensure trouble-free communication. Make sure that the required ports are open and that features such as UPnP are enabled.

The ports that must be open depend on the Ooma Office hardware or software that you have installed. Note that ports marked as local are for incoming firewall rules, while ports marked as remote are for outgoing firewall rules:

Desktop App

• remote UDP/TCP 5065
• UDP/TCP 8001
  

Base Station

• remote UDP/TCP 53, 1194, 1294
• remote TCP 80, 110, 443, 5061
• remote UDP 67, 123, 3480
• local UDP 49000 to 50000
• remote UDP 10000 to 20000
  

Ooma or Yealink IP phone

• remote UDP/TCP 5060, 5061
• remote UDP/TCP 53, 67, 68
• remote TCP 80, 443
• remote UDP 123
• remote TCP 5822
• local UDP/TCP 11780 to 11880
• remote UDP 10000 to 20000
  

Cisco IP phone

• remote UDP/TCP 5060/5061
• remote UDP/TCP 53
• remote UDP 123
• remote TCP 80
• local UDP/TCP 11780 to 12780
• remote UDP 10000 to 20000